Curing-Free Plaster

About

Product Description

Curing-Free Ready-Mix Plaster (RMP) is an innovative solution that removes the need for water curing, streamlining the plastering process. This advanced formulation sets faster, enhances strength, and offers increased coverage while minimizing shrinkage cracks—ultimately reducing costs and saving valuable time.

SUITABLE SURFACE

image_Cemeco Plast

Hollow Blocks

image_Cemeco Plast

AAC Blocks

image_Cemeco Plast

Fly Ash Bricks

image_Cemeco Plast

Red Clay Bricks

image_Cemeco Plast

Cement Blocks

image_Cemeco Plast

Stone Walls

image_Cemeco Plast

Concrete Surfaces

image_Cemeco Plast
Curing Free Ready-mix Plaster

Surface Preparation

Dry and clean

Ensure the surface is free from dust, dirt, oil, grease, or any substance that could affect bonding. Clean using a wire brush or water jet. Avoid dampness, leakage, or fungus.

Roughness

Ensure the surface is rough and stable. Moisten the surface with cement & water slurry and repair any weak spots with curing-free RMP.

Evenness

Level the surface for uniform plaster thickness.

Technical Data

Table Header Table Header Table Header Table Header
Pot Life:
1 – 1.5H Under Normal Climate
Initial Setting Time:
120-150 Min.
Final Setting Time:
10 hours
Water Retentivity:
Min 95%
Compressive Strength:
<12 MPa
Pull-Off Adhesion Strength:
<0.8 MPa
Water Requirement:
0.13-0.15 litres per kg
Max Silt Content in Sand:
Less than 5%
Guidelines For Ideal Results
  • Follow all application instructions for surface preparation and mixing
  • Mix in batches that can be used within 45 minutes.
  • Ensure the wall is not too dry or too moist before application.
  • Protect freshly plastered surfaces for 8 hours to prevent cracking.
  • Do not reuse mixed plaster or add water to a set mixture
  • Avoid mixing materials from different batches.
  • Use safety gloves, goggles, and dust masks during handling.
  • Avoid inhaling the mix or contact with your eyes.
  • Keep the area dust-free and wash hands thoroughly after use.
  • In case of eye contact, rinse with clean water and seek medical attention if necessary.

Apply in layers:

  • Take 5-6 ltr of water in a bucket and add 1%of Curing Free RMP according to cement weight slowly add cement and sand mix in a ratio 1:4 and mix until you get the required consistency.

Mixing Instructions:

  • Gradually add powder to water to minimize lumps and achieve a smooth consistency.
  • Use a drill mixer or paddle mixer for uniformity.
  • Mix enough plaster within 45–60 minutes to maintain plasticity.

Application:

  • Apply the mix with sufficient force, just like traditional
  • No additional curing is required after application.
  • Curing-free RMP Ready-Mix Plaster is available in 40 kg HDPE bags.
  • For further details or custom testing, contact our technical team.

Shelf Life

  • 12 months from the date of sealed packaging.

Storage Recommendations:

  • Store in a cool, dry, moisture-free area.
  • Keep bags sealed to prevent air exposure.
  • Avoid using sharp objects or dragging bags during unloading to prevent punctures.
Logo_Cemeco Plast

Cemecoplast: Plastering a Greener Tomorrow 

Facebook-f X-twitter Youtube Instagram Linkedin-in
Quick Links
Products
Information
Location

101 first floor shree chamber complex panchwati near RK mall, Udaipur, Rajasthan 313001

Email

info@cemecoplast.com

Phone

+91 9351086641

Copyright © 2024 Cemeco Plast, All Rights Reserved. | Powered By IFW Web Studio

Menu